Summers Disk-Chisel Manual do Utilizador descarregar pdf (Página 68)

3-2

SECTION 3 – OPERATION

INITIAL HOOKUP

1. Make tractor to hitch connection with locking draw pin and safety chain.

2. Retract jack and rotate into storage position. Connect Safety Light Kit to 7 pin receptacle.

3. Plug wing lift hoses into desired tractor outlet. Insure that tips and couplers are CLEAN.

4. Plug depth control hoses into desired tractor outlet.

5. Park tractor and coulter-chisel on a level surface.

6. Remove transport lock pins on wings.

IMPORTANT

When the wings are setting against the transport locks and wing lift cylinders are fully re-

tracted, rollers and winglift pin on the rod end of the cylinder must be centered in the slot

on the wing. The 7” washers should be resting on the stand on top of the machine frame.

If this is not the case, the eye bolt holding the base end of the cylinder must be readjusted

accordingly. See drawing on page 3-3.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 118 119

Sem comentários

Summers Disk-Chisel Manual do Utilizador Página 68