Summers Superchisel - 3-Section Manual do Utilizador descarregar pdf (Página 80)

4-2

SECTION 4 – MAINTENANCE

DAILY MAINTENANCE

1. Grease lift arms, walking tandem assemblies, and hitch pivot.

2. Check all hydraulic components for leaks.

3. Check tightness of all wheel bolts.

PERIODIC MAINTENANCE

1. Repack wheel bearings and check tightness (See Page 6-20).

2. Check tire air pressure (See specication page 5-2).

3. Check tightness of trip assembly hardware as explained under “Maintenance for after the

rst day and week of operation” (Page 4-1).

4. Check tightness of all hardware. Pay special attention to the hitch bolts and all pivot retain-

ing bolts.

5. Check chisel plow for damaged or worn parts. Replace as needed.

STORAGE

1. Clean and remove all excessive dirt and grease from chisel plow.

2. Grease all zerks.

3. To prevent rusting, repaint any areas that have been worn, chipped or scratched.

4. Retract cylinders when possible. Apply grease* to any exposed part of cylinder shafts.

*NOTE: Before returning chisel plow into service, all grease must be removed from cyl-

inder shafts to prevent damage to seals.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 137 138

Sem comentários

Summers Superchisel - 3-Section Manual do Utilizador Página 80